List of recommended "Smith's ?

[Baddog0302]

Several times I have seen mention of a list of recommended "Smith's, but can't seam to find any list or link to a list ??
Looking for one that won't turn his nose up at the RemAge Bbl. system
And I know about Northland / Crirerion, Mcgowen, ect,

 

[joshb]

You might send a PM to Dusty Stevens. He's a good guy.







Tip

 

[BenPerfected]

Dave Bruno in PA has done 8-10 barrels for me. He is a full time gunsmith and a successful competitive shooter. He has has fair prices and excellent service.
Ben

 

[CaptainMal]

Alex Wheeler and Eric Bostrom

 

[itchyTF]

Bruce Baer - Willow Hill, PA

 

[M-61]

'therifler' (site member) Tamaqua Pa. Mike does first class work at fair prices, with a respectable turn around time. Done work for me on a few occasions and I could not be more pleased.

 

[Shynloco]

Several times I have seen mention of a list of recommended "Smith's, but can't seam to find any list or link to a list ??
Looking for one that won't turn his nose up at the RemAge Bbl. system
And I know about Northland / Crirerion, Mcgowen, ect,

Baddog,
Go to the top of this page and click on "Bulletin". That'll get you to the opening page of the "Daily Bulletin." To the left of that page, you'll see a list of various topics/calibers/etc. Scroll down that list to almost the bottom and you'll find "Top Gunsmiths." Click on that and you'll find the list of excellent Gunsmiths that's been eluding you. Any one of those gents does top quality work. Personally, I'd go with Bob Green, which is not to say any of the gents mentioned by others doesn't do good work. But I am also aware that alot of those gents on that "list" are busy up to their eyebrows, so it's a hit and miss proposition. But Bob and a few others will make room for your needs. Just call them and ask. Hope that helps.

Alex

 

[Baddog0302]

Baddog,
Go to the top of this page and click on "Bulletin". That'll get you to the opening page of the "Daily Bulletin." To the left of that page, you'll see a list of various topics/calibers/etc. Scroll down that list to almost the bottom and you'll find "Top Gunsmiths." Click on that and you'll find the list of excellent Gunsmiths that's been eluding you. Any one of those gents does top quality work. Personally, I'd go with Bob Green, which is not to say any of the gents mentioned by others doesn't do good work. But I am also aware that alot of those gents on that "list" are busy up to their eyebrows, so it's a hit and miss proposition. But Bob and a few others will make room for your needs. Just call them and ask. Hope that helps.

Alex

Alax, THANK YOU, It will be interesting to see which ones accept the RemAge system, and which ones consider that system the same as kicking their dog and saying their grand child is ugly.

Wayne

 

[FFEMT]

But he is ugly, and so is the dog.......

 

[Liven The Dream]

Accuracy Unlimited Randy Gregory

If not the best then one of................................

 

[falconpilot]

Second on Dusty! Best there is!

 

[Grimstod]

Bill Goad of Premieraccuracy.com he has been very good to me. Knows more about the 6PPC then anyone i know. 4 time world record holder too.

 

[Mudcat]

Blair CLowdis, Clowdis Precision, in Randleman, NC

 

[hogpatrol]

Anybody with a lathe, some tools and a lot of hours watching youtube videos can fix you up. There's hundreds of them scattered hither and yon. You can peruse this site and others. Try and pick one with a NEW lathe or one that's been scoured and freshly painted. That'll be your guy. Good Luck!

 

[ebb]

Col. Billy Stevens.....

 

[Radar]

Anybody with a lathe, some tools and a lot of hours watching youtube videos can fix you up. There's hundreds of them scattered hither and yon. You can peruse this site and others. Try and pick one with a NEW lathe or one that's been scoured and freshly painted. That'll be your guy. Good Luck!

Someones feeling left out again. Would someone please recommend hogpatrol and shortgrass because they apparently have old worn out overhead drive lathes and are really jealous of those that have nice clean equipment...ya know they won't stop whining until someone recommends them.

 

[David 0306]

Precision Rifle and Tool Mebane NC Ray Bowman

 

[JBO]

Ryan Pierce, Piercision Rifles shoots pretty good too!