• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Link to .22 Barrel Liner article at rifleshooter.com

Gun Smith

Gold $$ Contributor
Ran across this link showing how a .22 barrel is drilled out and a liner installed.

https://rifleshooter.com/2018/04/22-barrel-liner-installation/

This shows drilling half way from both ends of the barrel in a lathe. Good clear photo's and good explanation. Thought some folks might like to see this, as it was talked about recently in a thread here. - http://forum.accurateshooter.com/threads/is-there-any-way-to-booger-up-a-rf-barrel-reline.3982821/

Gun Smith
That is good information, when I get healed up from back surgery I think I'll go out to my rickety old shop and install a couple of barrel liners in some old .22 rifles laying around the shop.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,830
Messages
2,204,054
Members
79,148
Latest member
tsteinmetz
Back
Top