Lighting up the press

[Panama Evans]

Hello all
Just wanted to show what a little time can do if you need some extra light for your press. For $13 and what I had laying around the house to extend the wires due to how many lights I used.
Parts
http://www.ebay.com/itm/WOW-4-X-10c...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

https://www.amazon.com/gp/product/B00S1GRFYY/?tag=accuratescom-20

3 pieces of shrink tube
Partial roll 3m double sided tape auto section Walmart
Scrap wire laying around

 

[vegas]

Came out nice, very useful.

 

[Big Mc]

Hello all
Just wanted to show what a little time can do if you need some extra light for your press. For $13 and what I had laying around the house to extend the wires due to how many lights I used.
Parts
http://www.ebay.com/itm/WOW-4-X-10cm-6-SMD-5050-White-LED-Strip-Lights-Caravan-Boat-Car-Waterproof-12V/112346138408?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

https://www.amazon.com/gp/product/B00S1GRFYY/?tag=accuratescom-20

3 pieces of shrink tube
Partial roll 3m double sided tape auto section Walmart
Scrap wire laying around

I don't think that is for me. I might be able to see what I am doing. Scores will drop..But if one needed to see that might be the answer,, Tommy Mc

 

[Milo 2.0]

These will compliment it.

 

[Just Dave]

Yep, These are plenty bright, Most of the time, I leave the overhead lights off to keep from attracting too many bugs, when I got the garage door open ( most of the time )
These are hard-wired, so I had to mount a driver, and mount a box under the bench that turns them on.

 

[Tha Gunson]

Yep, These are plenty bright, Most of the time, I leave the overhead lights off to keep from attracting too many bugs, when I got the garage door open ( most of the time )
These are hard-wired, so I had to mount a driver, and mount a box under the bench that turns them on.

Why 3 different single stage presses? Im still kinda new, thanks

 

[spife7980]

Why 3 different single stage presses? Im still kinda new, thanks

One for decapping, one for sizing, one for seating, one for forming stuff, one for small and one for large etc

Lots of different reasons, maybe he just likes to tinker. Once you do this for awhile you may like to expand your set up and test out different stuff. Just an extension of the hobby for some. I doubt I ever run multiple presses but I think it would be great if one day I could afford the space and equipment to spread out like that.

 

[atombomb]

Why 3 different single stage presses? Im still kinda new, thanks

my setup is very similar

press on the right is for decapping and less critical work...

 

[Papa Charlie]

I use the same lights for my Hornady progressive. They may a huge difference. Would not reload without them once you have used them.

 

[KenOath]

G

Hello all
Just wanted to show what a little time can do if you need some extra light for your press. For $13 and what I had laying around the house to extend the wires due to how many lights I used.
Parts
http://www.ebay.com/itm/WOW-4-X-10cm-6-SMD-5050-White-LED-Strip-Lights-Caravan-Boat-Car-Waterproof-12V/112346138408?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

https://www.amazon.com/gp/product/B00S1GRFYY/?tag=accuratescom-20

3 pieces of shrink tube
Partial roll 3m double sided tape auto section Walmart
Scrap wire laying around

Great idea thanks for sharing.

Cheers Rushty

 

[dolek]

Great idea,very inexpensive...I like a very well lit work area,going to give them a try.

 

[Just Dave]

Why 3 different single stage presses? Im still kinda new, thanks

.
Well the big'n in the middle does my 50BMG, so that's a deal in itself. The other RC IV's kind of get alternated. When I am testing new bullets, I will leave the micro-die seater in the press until I am done with set-up .. One of them often just sits with a Redding decapping die in it,