Laupa vs Norma brass?

[Performance Shooting]

Hi, I'm new to the 6ppc game and I'm looking to buy some preformed and prepped brass from Bruno's......currently Laupa is out of stock and Norma is in stock.......what are your thoughts as to the quality of the Norma brass vs the Lapua?

 

[338 dude]

Not in that caliber but I have tried them both Norma is good but Lapua is better

 

[wang243]

Try Greg Taylor here on AS. He turns with a IDOD and has brass.
Wes.. p1zombiekiller does great work
Bryan at FClass Products has a IDOD set up for the 0.0082/88 but not sure about the brass.
DJ's Brass service...here
Stay away from Norma brass for the 6PPC please.

 

[Stickler]

Depending on your chamber, Sako brass worked rel well for me.

https://www.gunsamerica.com/972284461/Sako-6-PPC-brass-and-ammo.htm

 

[BenPerfected]

Hi, I'm new to the 6ppc game and I'm looking to buy some preformed and prepped brass from Bruno's......currently Laupa is out of stock and Norma is in stock.......what are your thoughts as to the quality of the Norma brass vs the Lapua?

Ask DJ at DJ’s Brass Service for his opinion.
Ben

 

[Ccrider]

@DJSBRS brass if you are not going to fireform yourself.

 

[Dusty Stevens]

DJ or wes (p1zombiekiller) can fix you up very easily. Use lapua brass.

 

[280man]

There is probably a reason Lapua is out and Norma is on the shelf

 

[Jeffrey Tooker]

There is probably a reason Lapua is out and Norma is on the shelf

These people are good. They ship fast, and the prices are in line. I get my brass and bullets from them.

https://www.bluecollarreloading.com/collections/lapua-brass

Jeffrey

 

[dgeesaman]

Norma and Sako brass work great for non benchrest use.

To hit the tunes that agg best in competition you need the strength of Lapua.

 

[dgeesaman]

https://shop.ammo-one1.com/6mm-PPC-USA-Single-Cartridges_c961.htm

This link is to a Sako 6PPC-USA which should not be fired in a 6PPC benchrest rifle.

Also it’s a single cartridge, so at $6.95 each these aren’t being sold to be fired.

David

 

[WyleWD]

Hi, I'm new to the 6ppc game and I'm looking to buy some preformed and prepped brass from Bruno's......currently Laupa is out of stock and Norma is in stock.......what are your thoughts as to the quality of the Norma brass vs the Lapua?

If you're new to the game, the Norma PPC brass is certainly good enough to get you started. As you get more experience with neck turning and other brass prep you can switch to the Lapua if you want to. I've used it for quite a while now and have had no real problems with it. JME. WD

 

[dgeesaman]

If you're new to the game, the Norma PPC brass is certainly good enough to get you started. As you get more experience with neck turning and other brass prep you can switch to the Lapua if you want to. I've used it for quite a while now and have had no real problems with it. JME. WD

Be careful the length of the Norma brass may need trimmed back in addition to the diameter.

 

[WyleWD]

Be careful the length of the Norma brass may need trimmed back in addition to the diameter.

That is a good point. Even though it is "turned and prepped" they should be checked and trimmed to length if necessary to fit the chamber of the OP's rifle. Thanks for pointing that out. WD