I've been loading for a 219 Wasp, the brass was formed from 219 Zipper and 30-30 Win, both large primer.
Now I have some 219 Wasp brass formed from Federal 30 American brass - small primer.
My guess is the small primer would give lower pressures. I would like to know what I should be concerned with.
Any input would be greatly appreciated.
Now I have some 219 Wasp brass formed from Federal 30 American brass - small primer.
My guess is the small primer would give lower pressures. I would like to know what I should be concerned with.
Any input would be greatly appreciated.