Lapua 222 Brass

[areaone]

Any idea as to neck thickness for current Blue Box Lapua 222 Brass. Need to make sure the reamer dimensions will work with Lapua.

 

[bricktop]

KevinThomas is probably the guy to ask. PM might get you a quick answer.

 

[kolar55]

I don't recall exactly what the necks measured before turning but I turned some up for my recently built .250 neck .222. I ended up at .0118 giving roughly .248 loaded, and was removing brass all the way around. the necks ended up very uniform and 1 turn was all that was required.

 

[Rem6br]

The blue box lots I have are .013