Get the JKL trigger...
Set the Labradar "trigger" to 4, otherwise you will get a lot of false triggers when you close the bolt.
Get the JKL trigger...
Hmmm...I never considered that, thanks Pat.Set the Labradar "trigger" to 4, otherwise you will get a lot of false triggers when you close the bolt.
Hmmm...I never considered that, thanks Pat.
Yes, that's how I have to set mine up due to the benches at the clubCan the LabRadar be set up say 6" to 12" BEHIND the muzzle? Will the OEM microphones trigger it?
I have had mine for 3 years, use it 3 times a week and NEVER a problem....!!!That really sucks used it five times with nearly 6 or $700 invested and it fails maybe I’ll just hang onto my magneto speed a little longer
In the app Tap the logo in the upper I believe left-hand corner that should open the menu and allow you to change several settings etc.I just got a LabRadar. Bought an external battery, 32 Gb SDHC card and downloaded the APP. Everything fires up o.k and the APP works. Now I need to make a bench stand because the guy on here is out. I have not used it yet because it is way cold out.
The only question I have is the APP only displays m/sec. I hope when I have actual data it will change to ft/sec like I have the unit configured.
You are correct. Thank you.In the app Tap the logo in the upper I believe left-hand corner that should open the menu and allow you to change several settings etc.
I have never had a problem with it picking up .224 and even .20 diameter boat tail bullets.Con for radar when it matters is that the bullet base is the radar target. This means that smaller bullets with a very small boat tail base don't work because the radar reflection is inadequate. I suspect for the vast majority of users this will never come up but verify that your application works. ........
I use the remote trigger switch when I am shooting suppressed.Get the remote switch that mounts on the rifle. Eliminates the failure to pick up the shot problem.