• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

LabRadar Question

anyone have an inside scoop on when this will be available to public? They had been saying Fall of 2014 and am waiting with $$ in hand for this unit
 
savageshooter86 said:
anyone have an inside scoop on when this will be available to public? They had been saying Fall of 2014 and am waiting with $$ in hand for this unit

You and everyone else. I sent an email a few weeks ago and got back a response that said they were still planning a "Fall 2014" release.
 
I read somewhere that they have failed to obtain government approvals (it is a transmitter / receiver setup afterall) and that the project will not be moving forward.
 
They posted the following reply on their Facebook page on 10/15,

"Justin, Thanks for checking in with us and your concern for our team member. He is recovering and much progress has been. We should be selling within 60 days."

-- Scott
 
If you consider that "fall" doesn't start until March in the Southern Hemisphere we may have a longer wait than expected. :'(
 
What I got back from a query posted to their website:

"That rumor is completely false. We are in the final testing and we plan on shipping within 60 days. We will have an update on the website in about 2 weeks. Thank you for your interest, we know you will be pleased with the product. Thank you for your patience. We have been testing for the last 2 weeks with a large variety of calibers and have been very pleased with the results."
 
Lapua40X said:
If you consider that "fall" doesn't start until March in the Southern Hemisphere we may have a longer wait than expected. :'(
Unless planet earth has turned upside down, Quebec is in the northern hemisphere.
 
They have not returned my emails at all. Nothing torques me off worse.
 
savageshooter86 said:
Guess I could figure out how to set up oehler for this purpose.

Testing prone with a 35P requires some planning. The bases on my sensors are flat so a piece of pine 1x serves as a rail. Select a piece long enough to leave material at both ends then find the center where you drill the first 1/4" hole. Then exactly 24" in both directions another hole is drilled. Use sandbags to adjust for height and/or uneven terrain & you're good to go.

OR build a couple of 2x4 T-thingy's with a 13/16" hole drilled in the upright fitted with a lag screw that'll clamp onto the 1/2" conduit Oehler rail. Again sandbags are your friend when it comes to getting it stable on the ground.
 
Jay Christopherson said:
savageshooter86 said:
anyone have an inside scoop on when this will be available to public? They had been saying Fall of 2014 and am waiting with $$ in hand for this unit

You and everyone else. I sent an email a few weeks ago and got back a response that said they were still planning a "Fall 2014" release.
They had better get going since fall ends at 6:03 PM Sunday, Dec 21.

I just checked their website and it still says "WILL Be Available Fall 2014".
 
You mean to tell me that the Obama administration failed to grant a license to a Canadian company that would market to US gun owners????

WOW, that's hard to believe they could be so callous. Can you say KEYSTONE PIPELINE?
 
Infinition Inc. is already marketing products in the USA.
There GNSS/NIS and there CHC Nav are huge in the states.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,228
Messages
2,214,443
Members
79,485
Latest member
bhcapell
Back
Top