L.E Wilson vs Press for depriming

[243Lapua]

I just added an extra step on my decapping and bought a Neil Jones Decapper. Keeps my press clean. Don't mind the extra step.

 

[Oldbloke]

I use a Lee aluminum C press with their universal depriming die. I use the small pin to deprime everything I shoot. Minimum cost and no debris in loading dies or the press I choose to use.

I do exactly this. Same cheap Lee C press to prime with a Lee Ram prime. Works for me.

 

[Oldbloke]

POOF, magic!!!

Oh, that's fancy. My set up very different but the result is the same. Press is well above my bench too.
Since its only decapping you will probably be better off with a much shorter press handle. Say,,,12-14 inches.

 

[Mark W]

I use a Lee aluminum C press with their universal depriming die. I use the small pin to deprime everything I shoot. Minimum cost and no debris in loading dies or the press I choose to use.

That’s exactly what I do. I built a stand out of scrap wood so that it’s portable.

 

[GetReal]

Mine:

 

[asquared19]

I also use the Lee decapping. After doing many crimped primers, I did bust the pin. Shifted to the Squirrel Daddy replacement and have had zero issue.