Jewell trigger springs

[Kitestir]

Can anyone point me in the right direction on getting some trigger springs (small trigger return spring)for a Jewell benchrest trigger...
Thanks!

 

[Bill Norris]

Can anyone point me in the right direction on getting some trigger springs (small trigger return spring)for a Jewell benchrest trigger...
Thanks!

Maybe check with Larry Scott here on the forum. Not real sure if he might have any but I know he is a Jewell Trigger retailer.

 

[Clous]

Pm me your address and I’ll send you b & c springs with instructions.

 

[gunsandgunsmithing]

Pm me your address and I’ll send you b & c springs with instructions.

Ya beat me to it. I use all my lightest springs but I have a few of the others if I can help.

 

[Clous]

The last four I did were hunting rigs so they didn’t need 1.5 oz triggers. C spring is the light one 1.5-4 oz.

 

[gunsandgunsmithing]

The last four I did were hunting rigs so they didn’t need 1.5 oz triggers. C spring is the light one 1.5-4 oz.

Ahh..thanks

 

[expiper]

if you measure the coils and wire size you can contact century spring and get replacement stock from them---Roger

 

[Airborne-350G]

I know this is an old thread but I am looking for the spring to drop my Jewel trigger down to 2oz. Anyone know where I can get the spring?

 

[DRK]

Mcmaster has them. I measured the sizing from one I had.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[20PPC]

Mcmaster has them. I measured the sizing from one I had.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

^^^

 

[wkdickinson]

Mcmaster has them. I measured the sizing from one I had.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

Could you give us the measurements or the part no.
for the "C" (1.5-4 oz.) spring please?

 

[WyleWD]

Following..... VERY useful information. WD

 

[DRK]

Could you give us the measurements or the part no.
for the "C" (1.5-4 oz.) spring please?

That is the C spring.

 

[wkdickinson]

That is the C spring.

I know it's the "C" spring. You said you had the measurements for it - the measurements is what I asked for.

 

[DRK]

I know it's the "C" spring. You said you had the measurements for it - the measurements is what I asked for.

Look at the second tab of the Mcmaster listing, shows you the dimensioned drawing.

 

[expiper]

Look at the second tab of the Mcmaster listing, shows you the dimensioned drawing.

it would save folks a lot of measureing if you could give the specs/dimension of the spring since you have those numbers,,,---that would help those who cannot measure theirs,,,,Roger

 

[DRK]

it would save folks a lot of measureing if you could give the specs/dimension of the spring since you have those numbers,,,---that would help those who cannot measure theirs,,,,Roger

Alreary done, the dimensions at the top of the Mcmaster page and a fully dimensioned drawing if you scroll one tab over on the images in the listing. I don't know how much more clear this can be, there is no measuring needed.

If you want a Jewell C spring order what I posted from Mcmaster above. If you want the dimensions look at the Mcmaster listing.

 

[ckaberna]

Following for future reference

 

[Kracken McGraw]

Are the A&b spring just different wire diameter?

 

[Mike Montgomery]

Good question from Kracken.