JEWELL TRIGGER ALLEN WRENCH SIZE

[Nick Caprinolo]

I am in need of the size of allen wrench for a Jewell trigger recock action screw. It is the small screw that goes directly into the trigger.

Nick

 

[Sniperhandle]

It's most likely 0.050 that's what most triggers use.

 

[Konocti's Wigwam]

It's most likely 0.050 that's what most triggers use.

Exactly what mine is. You're talking about the hex that goes through the trigger, right?

 

[Nick Caprinolo]

Exactly what mine is. You're talking about the hex that goes through the trigger, right?

Yes, That's the one. I don't understand why they didn't include one with the trigger. They supply different springs but no way to install them. Their website states they are unable to obtain supplies and are looking for a new vender. The next problem will be finding one. What a mess

 

[jpx2rk]

https://www.amazon.com/s?k=050+allen+wrench&crid=2X5I6M2HXETB1&sprefix=.05%2Caps%2C128&ref=nb_sb_ss_ts-doa-p_7_2

 

[Buzzsaw]

I received a tiny, long handled hex driver with my very first Jewel, never got one with the last 2. Glad I kept it.

 

[AlNyhus]

The next problem will be finding one. What a mess

Any hardware store will have one. If you're near a Harbor Frieght, they have a nice set of Precision Miniature ones.

 

[Konocti's Wigwam]

Yes, That's the one. I don't understand why they didn't include one with the trigger. They supply different springs but no way to install them. Their website states they are unable to obtain supplies and are looking for a new vender. The next problem will be finding one. What a mess

I agree, but can't answer that for you.

Get a full set from Bohndus or Whia and don't look back.

 

[Chaotik]

I am in need of the size of allen wrench for a Jewell trigger recock action screw. It is the small screw that goes directly into the trigger.

Nick

I have a bunch. PM me and I'll send you one.

 

[Nick Caprinolo]

It's most likely 0.050 that's what most triggers use.

I have wrenches to fit other triggers, but this one is a smaller size.

I have a bunch. PM me and I'll send you one.

PM Sent

 

[DLT]

I have wrenches to fit other triggers, but this one is a smaller size.

PM Sent

You can run to any parts house and pick one up for hardly nothing. Beats waiting on the mail and possibly getting lost

 

[Rockchuck]

.050 pretty dang sure most standard set have them. Usually the smallest of the set.

 

[Nick Caprinolo]

.050 pretty dang sure most standard set have them. Usually the smallest of the set.

I have several really good sets of allen wrenches. None of the have a wrench small enough to fit.

 

[Old Navy]

I only have one. It came with a 1911 Wilson trigger. For adjusting the over travel.

 

[JSH]

I have run across some metric stuff lately.
The .050 is common. I have seen guys fight them, only to find the end is rounded off of their .050.
Bondhus is what I buy. Got to the point a few years ago I couldn’t walk by a set. Clearance isle at a tool out let, had a bunch of NAPA stuff, bought all the sets they had for $1 each.

Have also run across some odd size torx stuff lately.