Introduction - Area 419

[Area419Craig]

Hey guys, wanting to check in and say hello. I'm Craig with Area 419. Some of you may know about our products, some may not, but we make high-performance rifle accessories (geared toward PRS) as well as premium reloading gear.

You'll probably see our ads around, and you'll see me do some guest-writing on the bulletin, but if you need anything I'm here to be found or you can email me directly at Craig (at) Area419 (dot) com

Thank you for being advocates of and ambassadors for the shooting sports - it's going to take all we've got to fend off the wolves!

 

[NWnewguy]

Welcome and glad to see you guys here. I've watched your youtube videos as well. I will probably end up getting your brake/suppressor mount whenever the ATF decides I'm worthy!

 

[walker2713]

Welcome....glad to know you're here. I'm using your trickler base with my FX120i scale and very satisfied. Nice product-fast service!

 

[R.Morehouse]

Welcome........Your system upgrades for the FX120 are a pleasure to use. Got your E-mail and am looking forward to the 2 new ones.

Regards
Rick

 

[Dusty Stevens]

I got the funnel set. Very nice

 

[StanwoodSpartan]

Excellent products. I have a few of your products and always trying to save up for more!!!

 

[Pawnee Bill]

Craig does great work. Had him install a side bolt release on my new 700 Rem. Just fantastic!

 

[Nature Boy]

I have 3 rifles wearing your Hellfire brakes. Good product, good company

 

[Area419Craig]

Thanks guys, appreciate the warm welcome. If you're an Auto-Trickler owner and haven't seen, go to the website and check out the new housing for the thrower, as well as a larger hopper with shut-off valve. Just rolled them out this week.

 

[ballisticdaddy]

Thanks guys, appreciate the warm welcome. If you're an Auto-Trickler owner and haven't seen, go to the website and check out the new housing for the thrower, as well as a larger hopper with shut-off valve. Just rolled them out this week.

I was getting frustrated with my auto-trickler with it being so sensitive to being level and affecting the throw rate due to the lightweight 3D printed POS factory housing. Within minutes of using it mounted in your billet aluminum housing it is amazing how much more stable and consistent its throws now. Not to mention your base has the adjustable feet and do not need to constantly place various shims under the base as recommended by Adam to keep it from over throwing. Great solution and machining on this base, thank you for your insight on perfecting an already great product! http://www.area419.com/

 

[Willow]

Thanks guys, appreciate the warm welcome. If you're an Auto-Trickler owner and haven't seen, go to the website and check out the new housing for the thrower, as well as a larger hopper with shut-off valve. Just rolled them out this week.

Your powder funnel kit is an absolute gem. Just try and get your Hellfire muzzle breaks shipped to Delta Tactical in Australia so I can buy one!

 

[Area419Craig]

Your powder funnel kit is an absolute gem. Just try and get your Hellfire muzzle breaks shipped to Delta Tactical in Australia so I can buy one!

They're on the way to Delta now! Export is just a slow process.

 

[Dusty Stevens]

And make longer drop tubes. Some of us need em

 

[Area419Craig]

And make longer drop tubes. Some of us need em

That's easy! The 3" tubes can be connected to make a 6", 9", etc.

 

[Dusty Stevens]

I realize that i just dont want a rube goldberg crazy straw trying to get a 10” plus drop like we usually use.

 

[Dusty Stevens]

And if you put anodized ends on a cast acrylic tube that would be even better. Little extra vision helps out sometimes

 

[Dusty Stevens]

For those of us benchresters that live on the edge

 

[Carden260]

Now the neighborhood has gone to Hell.. The PRS guys are infiltrating US..... ugh.
but if your looking for some top notch reloading equipment, these are your guys. On the ball and always coming up with great new stuff..

Now go troll Snipers Hide... LOL

 

[Nature Boy]

Area419 is also the place to get your Tenebrex scope caps

 

[Area419Craig]

No, don't see it that way. We don't see PRS as our crowd, we see PAS as our crowd. People (who) Actually Shoot.

More cool stuff coming all the time!

Now the neighborhood has gone to Hell.. The PRS guys are infiltrating US..... ugh.
but if your looking for some top notch reloading equipment, these are your guys. On the ball and always coming up with great new stuff..

Now go troll Snipers Hide... LOL