Indicator for chambering

[hoz53]

I know this has been discussed here a "few" times but the indicator I want is the
Interapid 312-15B Horizontal with the 2.675 point right? thanks

 

[Skattergun]

I have the interapid 312-15b and the mitutoyo 513-504 I probably use the mitutoyo 90% of the time. I have a few different length contact points for it.

 

[hoz53]

I have the interapid 312-15b and the mitutoyo 513-504 I probably use the mitutoyo 90% of the time. I have a few different length contact points for it.

Thanks 4 that

 

[jackieschmidt]

I also use the Mitutoyo 518/504, especially in BR length chambers.

Mitutoyo® 513-504 - 513 Series™ 0 to 0.1" SAE Dial Pocket Test Indicator Basic Set

513 Series™ 0 to 0.1" SAE Dial Pocket Test Indicator Basic Set - Part Number 513-504 (513504) by Mitutoyo. Available in Measuring Tools Department at www.toolsid.com

www.toolsid.com

 

[DaveTooley]

Yes to the 312B-15
I've used mine so much I had to have it rebuilt once.

 

[butchlambert]

Yes to the 312B-15
I've used mine so much I had to have it rebuilt once.

I guess you made it home safely.

 

[DaveTooley]

Safely is relative. I didn't know I was in for an off road experience getting out of TX on I-10. It was great to finally meet you.

 

[hoz53]

Yes to the 312B-15
I've used mine so much I had to have it rebuilt once.

thanks dave

 

[hoz53]

I also use the Mitutoyo 518/504, especially in BR length chambers.

Mitutoyo® 513-504 - 513 Series™ 0 to 0.1" SAE Dial Pocket Test Indicator Basic Set

513 Series™ 0 to 0.1" SAE Dial Pocket Test Indicator Basic Set - Part Number 513-504 (513504) by Mitutoyo. Available in Measuring Tools Department at www.toolsid.com

www.toolsid.com

thanks jackie- i will look into that one