• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

IMR 4198 in 6mm br

I dont see why you couldn't, Hodgdon does not give a load for it, but they show 22.0grs with a 70gr Nosler BT for a 6PPC . So that would make you a good place to start your loads and just work up till you see pressure signs and then back it off a little .
 
The new Hodgdon annual reloading manual shows loads for the 6 BR with H4198.

Starting / Max. Loads:

55-gr. Nosler = 26.0 / 28.8
58-gr. Vmax = 26.0 / 28.5
60-gr. Sierra HP = 25.0 / 27.5
65-gr. Vmax = 25.0 / 27.5

They list muzzle velocities in the same range as with the favorites like Varget, Benchmark, etc. Mind you, this is Hodgdon 4198, not DuPont/IMR, so adjust loads accordingly. I have no experience of any kind with IMR powders so can not offer any suggestions.

Let us know how your loads work.

Merry Christmas ...
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,838
Messages
2,204,534
Members
79,157
Latest member
Bud1029
Back
Top