I need a 7/8's bushing for a RCBS A4 Big Max press

[pgg]

Where can I get that please? I guess I need some shell holders too. I am hoping to use this for a .338-408 CT. Thanks for any suggestions. PG

 

[rg1]

RCBS I think has stopped selling Big Max parts. Guess they have ran out of parts and won't make any more. Worth a call to RCBS to see if they have a bushing though. I think the threads are 1 3/8-12, check your press to make sure. I see Ch4D has top bushings listed.
http://www.ch4d.com/catalog/?p=65
Part # PTB04

 

[Taildrag15X]

Keep an eye on ebay also.....parts always show up there.

 

[artbosco]

Where can I get that please?

If you meant 7/8-14 shims vice bushings for your press, they're here at Sinclair: http://www.sinclairintl.com/.aspx/pid=33197/Product/Skip_s_die_shim_kit____7_8_14_

Another good source for Press shims, Wilson Seater Die Shims [instead of a micrometer top] and Carbide Bushings for your Bushing Dies is:

BUD MUNDY, NBRSA Mississippi Valley Region Director
5956 Old Hickory Trail
Hillsboro, MO 63050-3251
Phone: 636-797-5786
Email: bcmundy@earthlink.net

Hope this helps.

 

[snowshooze]

If you still need that bushing, I can make one. It won't be cheap...but it will be true.
Mark