Hybrid 100V in 6 or 6.5 Creedmoor

[vonb]

Has anyone had any luck getting decent groups with H100v? I tried it in .243 Win years ago and gave up on it due to poor accuracy. I have a couple pounds left and figured I try again. I'll be trying it in .260, 6/6.5 Creed.

 

[joshb]

I use it in my 6.5 x 55 Swedes with good results. Give it a try!

 

[dnellans]

it’s pretty much interchangeable with h4350 and rl-16 in the creed cases. take out half a grain and find a load using your normal process. i bet it’s within .2 of your current all said and done

 

[Murray Brook]

I've had good results using it in my 7/08 with 145 gr bullets. Velocity and accuracy.

 

[ebb]

I want to try some badly but haven't found any yet.

 

[Kurz]

I'll be trying it in .260, 6/6.5 Creed.

I have found accuracy loads using 100V in the 6mm Creedmoor and the Berger 105 VLD.

The same goes for the 6.5 Creedmoor and the 130 grain bullets.

Both of these were in bolt actions and semi-auto platforms.

The 7mm SAUM was excellent with 100V and the Badlands 150 gr. long range or moderate range hunting.

There are probably a dozen or more cartridges and appropriate bullet selections which will use 100V.

 

[Toms]

I have found accuracy loads using 100V in the 6mm Creedmoor and the Berger 105 VLD.

The same goes for the 6.5 Creedmoor and the 130 grain bullets.

Both of these were in bolt actions and semi-auto platforms.

The 7mm SAUM was excellent with 100V and the Badlands 150 gr. long range or moderate range hunting.

There are probably a dozen or more cartridges and appropriate bullet selections which will use 100V.

I tried it in a 270 Winchester Remington classic. Shoots great 1/2" with 3220 fps with ,130 gr Sierra btsp. Was hot load but has been fine in the fall hunting season. Toms.