• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

How to include a photo in your post

CT10ring

CT10ring

Have a .jpg (photo) on your desktop or in a folder you can access.

Keep it small, under 500 kb.
Too large won't upload.

If it's too large, open file in a viewer program (preview on a mac for me), re-size smaller if needed.

Below text box -- is a "button" to upload/include a file(photo).

*click button
*browse on your computer to find the photo.
*click "open" this will attach the photo to your post.

you can put a small image (thumbnail) or large full image.
then create thread.
 

Attachments

  • 6X47L_Surgeon.jpg
    6X47L_Surgeon.jpg
    228.7 KB · Views: 58
Last edited:
CT10ring said:
Have a .jpg on your desktop or in a folder you can access.

Keep it small, like 450-750 kb. Too large - AS will "reject it".

If it's too large, open file in Preview (on a mac), re-size it using the slider for large-medium-small file.

Save it and re-name it if you want to keep both size files (photos).

at the bottom, below text box -- is a "button" to upload/include a file(photo).

click it.
browse on your computer to find the photo.
click "open" this will attach the photo to your post.

you can put a small image (thumbnail) or large full image.
then create thread.
Click to expand...
Funny you should post that. Is that your rifle? If so, how do you like that bipod. I was looking at those, but not to many reviews out there.
 
I think the company that actually makes the bipod is fortimere or something like that. It’s a German company. They make an over the barrel and under mount like yours. Regardless, is there a swivel adjustment?
 
Guys, we’ve been over this many times.

1. Make the photo 800 pixels wide JPG
2. Using mouse, drag photo into the message
3. Select full or thumbnail as you wish

DONE.

Sizing - You can do this with many free programs, such as Irfanview.

We do have a file size limit, but I’m telling you, if you set the output as jpg and width at 800 pixels you’ll be fine.
 
Last edited:
When I take a pic with phone.....

Have lost some really nice pics stored on phone when said,takes a dump. So now,on any pic worth keeping,I email them to myself. In that process,the first thing asked is about resizing. Hit the small resize,title it,send.

Then it's stored and resized ready to post.

Be patient to those folks that think this should be easy or intuitive....... it most assuredly IS, for those grown up on computers. For others,holding a Tig bead at 2 amps on a pin head comes "naturally". It's all in ones perspective. I find computers very tough to get the hang of? and would rather be working with a pce of equipment.
 
Intheshop said:
When I take a pic with phone.....

Have lost some really nice pics stored on phone when said,takes a dump. So now,on any pic worth keeping,I email them to myself. In that process,the first thing asked is about resizing. Hit the small resize,title it,send.

Then it's stored and resized ready to post.

Be patient to those folks that think this should be easy or intuitive....... it most assuredly IS, for those grown up on computers. For others,holding a Tig bead at 2 amps on a pin head comes "naturally". It's all in ones perspective. I find computers very tough to get the hang of? and would rather be working with a pce of equipment.
Click to expand...

You said it my friend, I finally got a picture posted after 10 years of trying and they took it down because I didn't write first. No where did it say to do that. Went over to a friend's house that has computer service and tried to figure out how to use the infranview and it was impossible for me to figure out. I would like to see some of these computer geeks take a spray rig with 20" nozzle spacing and a 36' boom and put out exactly 3oz of one chemical that cost 3bucks an oz and piggy back another chemical @ 24 oz. Per acre that is 54bucks a gallon using 15gal of water per acre on 500 acres. Let them figure out ground speed, rig pressure, and nozzle size. I can do that but can't figure out how to get a picture on here and they say how simple it is, just use infranview, well, I don't have that on my phone! And it's all I have to work with..... I can send pictures all over the world, EXCEPT here, sorry for the rant, just wore out from trying.
 
Trying out this picture thing, and I thought I was the only one who couldnt figure it out.
Pic. is my grandson Gage with his Borden 30BR.20170806_150857.jpg
 
You must log in or register to reply here.

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Classified Ads

Forum statistics

Threads
165,889
Messages
2,205,745
Members
79,196
Latest member
pkitrinos01

Share This Page

Back
Top