• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Help

I turn mine into the shoulder maybe a couple thous. just barley feel with my finger nail.
 
BR brass or not (I shoot long- and mid-range NRA) by allowing you neck-turning cutter to reach just to the shoulder a little bit you're assured the entire neck length is trimmed evenly as well as thinning just a portion of shoulder brass that otherwise may eventually migrate up into the neck. This may contribute to "donut" formation (or not, depending upon whom you talk to) which is easily and wisely avoided.

All this assumes your neck-turning cutter's profile has the correct angle at the secondary cutting edge for the brass you're turning.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,834
Messages
2,223,835
Members
79,930
Latest member
Chief Sitting Bull
Back
Top