Help with shell holder identity

[wayner]

Ned’s help identifying a shellholder - no manufacturer/company markings, larger diameter than shell holders that clip into the rams on my RCBS loaders ( approx .484 vs .432) . This shell holder also is threaded in the primer hole. Top of shell holder is marked ‘29’ and a .45 ACP case slips in/out nicely. Also outside rim is knurled.

Herters ? Maybe?, old CH, Hollywood?

Unknown on left next to an older RCBS extended shell holder.

Thanks

 

[CJ6]

Looks like Herters. I'll see if it matches the ones I have.

 

[RegionRat]

The one on the right looks like an old RCBS version.

 

[Presscollector]

The one on the left is Herter's. Why some previous owner wanted to thread the primer hole is anyone's guess, but they turn up from time to time.

 

[Ron Blain]

The one on the right looks to be the an RCBS #X used with the RCBS Comp FL Die Sets #37801. I have one in 308 Winchester which uses the #X3 shell holder with the 3 being the # for a RCBS .308 Win (or spawn of) or .45 ACP and a host of others. Interesting in that while the die box mentions use shell holder #X3 the actual shell holder has no markings on it. I just keep it in the box with the die set.

Ron

 

[Bill K]

The shell holder, I believe is a Herter's, from years past. The extended ram, is a RCBS, or at least it looks like one I have from RCBS.

 

[wayner]

Thanks to all. I suspected the larger one ( left) to be a Herters but have no presses with that ram. I knew the RCBS to be an extended one but knowledgeable confirmation always appreciated!!
Thanks!

 

[Dusty Stevens]

Thanks to all. I suspected the larger one ( left) to be a Herters but have no presses with that ram. I knew the RCBS to be an extended one but knowledgeable confirmation always appreciated!!
Thanks!

@Tommie has the herters press that fits

 

[Tommie]

Ned’s help identifying a shellholder - no manufacturer/company markings, larger diameter than shell holders that clip into the rams on my RCBS loaders ( approx .484 vs .432) . This shell holder also is threaded in the primer hole. Top of shell holder is marked ‘29’ and a .45 ACP case slips in/out nicely. Also outside rim is knurled.

Herters ? Maybe?, old CH, Hollywood?

Unknown on left next to an older RCBS extended shell holder.

Thanks

@Tommie has the herters press that fits

Yep i have one of those old Herters. If you have no use for that shell holder I’d buy it from you.

 

[CJ6]

Yep i have one of those old Herters. If you have no use for that shell holder I’d buy it from you.

I might have some doubles Dusty. PM you address.

 

[Dusty Stevens]

I might have some doubles Dusty. PM you address.

Thats @Tommie i have the same press but i have shellholders for it

 

[CJ6]

Thats @Tommie i have the same press but i have shellholders for it

OK.