Help with base-to-ogive measurement on 6.5mm bullets

[ballison]

I was hoping someone might have these measurements or point me to somewhere I can get them. I need the total bullet length and the base-to-ogive length for the 2 bullets below . The base-to-ogive length I need is to the "true" ogive/bearing surface junction, not one measured with a Hornady LnL Overall Length Gage.

Sierra MK 6.5mm 142gr

Lapua Scenar 6.5mm 139gr

THANKS!!!

 

[coford]

I can provide what you request for the Sierra's but in all likelihood it won't do you much good as every lot of bullets varies. The overall length is: l.366 to 1.371 (I measured 10 bullets). The base to the junction of the ogive/bearing surface junction is .743 to .750 (I measured 10 bullets).

Hope this helps.

 

[ballison]

Chris,
That is exactly what I needed. Thanks for your help!!