Help for friend with 6CM/H1000/115DTAC

[Rob01]

As the title says I need some help for a friend that doesn't have alot of time to work up a load using the 6CM with H1000 and naked 115 DTACs. Brass is Hornady. He'll be using it in a 28" Kreiger barrel which I believe has a 7.5 twist. He's looking for around 3000fps. Any good loads you guys have using the above components would help out alot. Thanks.

 

[LESLEY]

not knowing what action its hard to say. I shoot a renington action Bartlin 28 inch bbl 46.6 of H 1000 10 thou in rifling. I am sure Joe will be along he can tell ya more

 

[joesr]

Normally 49.0 grains is a good place to start. I works with Lapua and Winchester brass.

Velocity should be around 3050 to 3100 fps.

Please contact me directly if you need more help.

Joe Hendricks
6cm@comcast.net

 

[joesr]

Also, jump the bullets about 35 thou. This is the sweet spot.

Joe

 

[Rob01]

Thanks Lesley and Joe. He's using a Surgeon Tactical action.