Help...6,5x25WSSM

[2RECON]

Hallo,

i´ve to prerare Ammo for a proove-house Test of a rifle in 6,5x25WSSM., German Gun Law
What i need is a COL for a Load using 140grs.Berger VLD´s.
The Chamber is made by a reamer made by D.Kiff.........
I need a COL where the Bullet is NOT tutching the rifeling.
Any help..??

Thank´s a Lot...

2RECON

 

[mikecr]

You'll have to check this with the barrel in-hand. Regardless of the reamer, the chamber/throat will vary depending on who cut it how deep..
There is no SAAMI standard for it.

 

[BillK]

I have a friend that shoots that cartridge super well!!! He always has the bullets touching the lands and he does shoot bergers. He has his reamer made so that the pressure ring on the bullet is .050 above the neck shoulder junction. He uses vv165 for powder, winchester brass and has used both cci250 primers and fed210 primers.

I personally shoot a 6.5-243wssm and I use winchester brass, re22 for powder and 210 fed primers with a 140gr berger. My gun is throated the same as my friends.