WANTED Heavy Sand

[Po' Man's Precision]

I am in need of some heavy sand, not much maybe around 5 lbs just enough to finish filling a shooting bag. Thanks and God bless!

 

[cavedweller60]

Just figured I would throw it out there but, is it possible that sand blasting grit would work for you? It is much heavier than regular sand but, I don't think it is quite as heavy as heavy sand. Just a suggestion.

 

[rlporter507]

This is where I got my zircon sand, they have just about all there is.
They have a display with Close to 100 jars of different sands.

UniWest - Denver's Best Sandblasting Supplies & Blast Media

UniWest is Denver's largest distributor of sandblasting supplies, blast media, sandblasting equipment, and anything else you could need for finishing

unitedwesterndenver.com

 

[Po' Man's Precision]

Just figured I would through it out there but, is it possible that sand blasting grit would work for you? It is much heavier than regular sand but, I don't think it is quite as heavy as heavy sand. Just a suggestion.

It might but I only need a small amount and figured someone might have some laying around. Thanks

 

[Po' Man's Precision]

This is where I got my zircon sand, they have just about all there is.
They have a display with Close to 100 jars of different sands.

UniWest - Denver's Best Sandblasting Supplies & Blast Media

UniWest is Denver's largest distributor of sandblasting supplies, blast media, sandblasting equipment, and anything else you could need for finishing

unitedwesterndenver.com

That would be nice but I don't need a 50 lb bag and I'm on east coast (Kentucky) but would be nice lol

 

[hoz53]

That would be nice but I don't need a 50 lb bag and I'm on east coast (Kentucky) but would be nice lol

i have some sand blasting media i purchased just for this use. i think its the next heavy to zircon. i could send you some for shipping—. could get more info if youd like.

 

[Herrmannator]

I use number 7 lead shot in my bags mixed with some sand . Very heavy and compacts like sand.

 

[6BRA]

Do you have a Harbor Freight near you? I believe they sell a black blasting sand.
May be the easiest for you to source.

 

[cavedweller60]

Do you have a Harbor Freight near you? I believe they sell a black blasting sand.
May be the easiest for you to source.

so does tractor supply

 

[cavedweller60]

i have some sand blasting media i purchased just for this use. i think its the next heavy to zircon. i could send you some for shipping—. could get more info if youd like.

I was going to offer the same but, it is likely shipping would cost more than going to Tractor Supply and buying some.

 

[Shooter13]

That would be nice but I don't need a 50 lb bag and I'm on east coast (Kentucky) but would be nice lol

Tractor Supply or ACE would have some.

 

[Bcjones]

I’ve got some leftover here in Henderson, NV. I could probably shove it in a small usps flat rate box - you cover shipping and it’s yours. Brian

 

[Po' Man's Precision]

Thanks all I'll go looking at harbor freight and/or tractor supply tomorrow.

 

[cavedweller60]

Thanks all I'll go looking at harbor freight and/or tractor supply tomorrow.

Just FYI, my TS has it for about $14 a bag. You will have enough for yourself and friends . I buy the more coarse media because it doesn't seap out of thread holes and such.

 

[rlporter507]

Do you have a Harbor Freight near you? I believe they sell a black blasting sand.
May be the easiest for you to source.

This works also
A 50lb bag of zircon sand is just about 1/4 bigger than a bag of flour.
That stuff is heavy!

 

[25ring]

Try Amazon for garnet sand, almost as heavy as zircon and quite a bit cheaper. Free shipping if you have Prime.

 

[Po' Man's Precision]

Do you have a Harbor Freight near you? I believe they sell a black blasting sand.
May be the easiest for you to source.

I'm gonna go searching tomorrow. I shoot 6 BR Ackley also and absolutely love it. Easy button as far as reloading

Just FYI, my TS has it for about $14 a bag. You will have enough for yourself and friends . I buy the more coarse media because it doesn't seap out of thread holes and such.

I think i found a friend with some excess lead shot and I'm gonna mix it and some media. It's at 16 lbs right now but I'm shooting for 20 lbs

 

[Jerry Snyder]

I looked and found a pound of heavy sand, probably won't be enough to do you any good, but it is yours if you need it.

 

[Aceball]

A company I once worked for many years ago owned one of, or maybe the only US based, plant that grinds volcanic rock down to fine grit. That plant was located in SC somewhere about an hour or more from Anderson, SC. While working projects in Greenville we got a call to help the plant out with some environmental process control issues. While I was visiting we walked by a 20 ft high pile of Heavy Sand! I'm sure the plant manager would have allowed me to haul off a truck load. Interesting enough, the stones were shipped from the beaches of France. Wish I could just remember the name of the plant...

 

[Po' Man's Precision]

I looked and found a pound of heavy sand, probably won't be enough to do you any good, but it is yours if you need it. View attachment 1681984

I very much appreciate your offer but I say it wouldn't be beneficial to either of us with shipping and what not. I appreciate it and God bless!