Has anyone ever....

[4xforfun]

I am going to join the suppressor club (I mean it this time ) Anyway, My thoughts were to make use of some of my older 300 WSM/WBY HV Match tubes. I figured on cutting a few inches off the chamber end and rechamber for a 30 BR. Probably cut 6 - 10 inches off of the muzzle end also. Tubes are all 30+ inch 1 - 10 twist Heavy varmint contour, so there is 5 inches of 1.25 to work with at the chamber end.

Was thinking of 30 BR and being able to run full house loads and also the 220 and 240 SMK subsonic. I have a bunch of them laying around. I would also thread a few other tubes also....6-47L, 6.5-47l Dasher, etc..

Anyone here play with a combo like this .

Tod

 

[TomN]

I am going to join the suppressor club (I mean it this time ) Anyway, My thoughts were to make use of some of my older 300 WSM/WBY HV Match tubes. I figured on cutting a few inches off the chamber end and rechamber for a 30 BR. Probably cut 6 - 10 inches off of the muzzle end also. Tubes are all 30+ inch 1 - 10 twist Heavy varmint contour, so there is 5 inches of 1.25 to work with at the chamber end.

Was thinking of 30 BR and being able to run full house loads and also the 220 and 240 SMK subsonic. I have a bunch of them laying around. I would also thread a few other tubes also....6-47L, 6.5-47l Dasher, etc..

Anyone here play with a combo like this .

Tod

I use my TBAC Ultra 7, 30 cal, on everything from a 300 PRC to a 6 Dasher. Works great.