Harrels 6ppc

[Lkwebb]

I got one of his dies and tonight I was resizing some fire formed brass that I used in my club match.
The bushing that came with the fl die isn't sizing the neck. I can literally just push a bullet in...
Guess I need to order another bushing. My loaded rounds are about ..267 and .268

 

[BoydAllen]

The dies don't come with a bushing. They do come with a brass shoulder bump gauge. It goes over your case necks with a matching angle on one end so that you can use your calipers to measure the case before and after sizing.

 

[Lkwebb]

The dies don't come with a bushing. They do come with a brass shoulder bump gauge. It goes over your case necks with a matching angle on one end so that you can use your calipers to measure the case before and after sizing.

Never seen one like that. Im glad I learned something new thanks

 

[newbieshooter]

The dies don't come with a bushing. They do come with a brass shoulder bump gauge. It goes over your case necks with a matching angle on one end so that you can use your calipers to measure the case before and after sizing.

 

[Shooter13]

Also you need to have equipment (caliper or mic) that is going to tell you if it is a .268 or .267, there should be no guessing.

 

[Lkwebb]

Also you need to have equipment (caliper or mic) that is going to tell you if it is a .268 or .267, there should be no guessing.

Well I have the 30 degree comparator tool from short action Customs