Harrells Tuner Brake ?

[Ccrider]

Yes it does. We clean our after every match. +\- 300 rounds. Standard Harrell.
Todd

Now this is news to me. Thanks. Exactly how do you clean them.

 

[Todd Earhart]

There is a tuner cleaning tool sold that will accept a shotgun size patch. I just remove the weight from ours and start the corner of a normal shop towel and cork screw it in and pull it out a couple times. I do this before I clean the bore in case any rag fibers get pushed up in bore.
Todd

 

[USMCDOC]

There is a tuner cleaning tool sold that will accept a shotgun size patch. I just remove the weight from ours and start the corner of a normal shop towel and cork screw it in and pull it out a couple times. I do this before I clean the bore in case any rag fibers get pushed up in bore.
Todd

use a 3" inch patch

 

[gunsandgunsmithing]

You can go the whole Hopewell deal which can burn through lots of ammo. Plan B. If your barrel is 24”-26” start @200 and work in and out 15-20 clicks. You may be good @200-210.

Hmmmm. Agreed. You'll find a good tune within that range with vitually any tuner. Hopewell method is well named. Move it and well, you hope it shoots small. Lol!

 

[TRSR8]

Hmmmm. Agreed. You'll find a good tune within that range with vitually any tuner. Hopewell method is well named. Move it and well, you hope it shoots small. Lol!

Well, my experience is with Harrells, but the guy that built my guns and more than a few winners was rarely outside that window with several brands, virtually all .900”-.920” dia. Works for me.

 

[Todd Earhart]

I agree there is usually a window with a standard Harrell at 200 +\- 10 that will shoot. Is it the best is always the question. There is so many weight\ tube combinations that adds to the 0 to 500 adjustment. Testing is the only way of knowing. Testing is tough without ammo to back it up.
Todd