Harrell's Bump Die available in Dasher

[birdog]

Lynwood is now making a Dasher bump die.
I tried mine last week-end and it works
beautifully. He ships a bump gauge with it.

He makes a bump die for the PPC, BR, and Dasher.

 

[40X Guy]

Thanks for the info, I'll be looking into one.

Frank

 

[lmorrison17]

Is it only for a shoulder bump or is it a FL die?
Larry

 

[ridgeway]

The one I have from Harrells is a full length sizer, not a bump die.

 

[birdog]

Is it only for a shoulder bump or is it a FL die?
Larry

Larry,
I had some old cases that were tight at the top when I lifted the bolt
After running through a Redding body die and a Redding full length die
the bolt was still tight at the top. I ran them through my Harrell and
the bolt opened perfectly. Send Lynwood a couple of fired cases and he
fits a custom die to you chamber.

 

[skeetlee]

If your bolt was tight or if it clicked most likely the base of the case wasnt getting sized properly. A hard lift is usually a base issue. In my experience anyway. Glad the die worked. harrells makes some darn good stuff! Lee

 

[JayCutright]

How much they selling for?

 

[ridgeway]

$80