Hard Chrome plating

[Pav67]

Anyone have an excellent hard chrome finisher they would recommend.I need a pistol build finished. Thanks

 

[rijndael]

I've used APW, no complaints.

Accurate Plating & Weaponry | Gunsmith In Newville, Alabama

APW offers premier firearm refinishing including Chrome, Nickel, Bluing and Cerakote. We also provide quality gunsmithing, customization and laser engraving.

apwcogan.com

 

[Walt Krafft]

APW has done several guns for me. Great quality.

 

[Pav67]

Thanks to both of you.I’ll look them up

 

[kmcdonou]

I have used CCR Refinishing: https://www.ccrrefinishing.com/

They did good work on my Sig P220 10mm. I had it two-toned from the original stainless. Although not hard chrome, but similar in appearance, Cera-Plate II is their Electroless Nickel / Boron Nitride tank based plating system, and I used it on the slide. Tough and corrosion resistant with lubrication built-in. I used their darker version called Dusk for the frame

 

[rwj]

Anyone have an excellent hard chrome finisher they would recommend.I need a pistol build finished. Thanks

Regrets the shop I used closed But one lesson I learned the hard way the first time was not asking about layer thickness before sending parts. It’s a lot easier to stone bare steel surfaces to allow for the buildup than hard chrome afterwards!

 

[46and2]

I have used CCR Refinishing: https://www.ccrrefinishing.com/

They did good work on my Sig P220 10mm. I had it two-toned from the original stainless. Although not hard chrome, but similar in appearance, Cera-Plate II is their Electroless Nickel / Boron Nitride tank based plating system, and I used it on the slide. Tough and corrosion resistant with lubrication built-in. I used their darker version called Dusk for the frame

I bet it is sharp!
You've got to give us a pic of your P220!

 

[Fuj]

Here In Pa. Ron Mahovsky's Metalife. Website available.
One of the best.

 

[Pav67]

Thanks for the options!