H322 ?

[cocopuff]

Any one using H322 in their 6BR ? I found it to be better than Varget in mine with a 1 in 8 twist using 68 gr bergers....What I found out was that having this bullet jump almost .042 that it was extremly acurrate at 250 yards.Although I do have to make a scope adjust from the Varget...And it hits almost point on as the H4895 does...Is this unusall to have a bullet jump this far or is it normal...I know some guys like a jam fit..Which does not work for me at all...

 

[Alex Wheeler]

I was using H335 in mine with the 60 grain Sierra HP .009 in. Its temp sensitivity drove me crazy so I switched to H322, It shoots even better. I gave up a little speed but my groups are more consistent.

 

[jonbearman]

I use it exclusively in 3 of my 6br's with excellent results.

 

[Tokimini]

I used H322 with 107 grain Sierra MKs to break-in my new 6BR because it was about the only powder I could find for this caliber. I wasn't expecting much for bullets this heavy but I was consistently getting sub half inch groups at 100 yards during the barrel break-in. I'm getting some Bart's 68 grain bullets in a few days which should shoot better with this powder than the heavies but they worked so well I'm going to play with seating depth and see if I can shrink the groups.