Got myself in a pickle

[Fern]

Well I was trying to do one of those diy chamber gauges on the site for my tikka

How to Craft Your Own Chamber Length Gauge « Daily Bulletin

We are sad to report that long-time Forum member Frank S. (aka fdShuster) passed away in 2015. Frank was a very knowledgeable shooter who was always willing to help others. Here is one of Frank's smart inventions. He devised a way to measure the length of a rifle's chamber using a fired...

bulletin.accurateshooter.com

Well when I closed the bolt the cut off piece got stuck in chamber and now having hard time getting it out.
Rather then make things works I figured swallow my pride and ask for help or suggestions

 

[xr650rRider]

Bronze brush larger than neck.

 

[Fern]

Well thank you very much for suggestion got it out with a bigger bush (didn’t have a bronze one)
Glad I asked before I did something that would have made it worst

 

[Riesel]

This works quite well for extracting the remaining brass after cartridge separation

 

[DLT]

This works quite well for extracting the remaining brass after cartridge separation

Yea it does. Works like a top

 

[P1ZombieKiller]

problem solved in 12 mins.

 

[1911nut]

Good save!

I use these

SINCLAIR INTERNATIONAL Sinclair Chamber Length Gage

Check out SINCLAIR INTERNATIONAL Sinclair Chamber Length Gage available Online at Brownells Today and many more Case Length Gauges products are available in our Reloading Department.

www.brownells.com