glue ins

[twilson]

Looking for instructions on how to do a glue in
either video or written.
Thanks,

 

[tightneck]

Don't know of anything specifically for a glue in, but Richard Franklin's pillar bedding video is supposed to be very good. Once you do the pillar bedding, the glue-in is as simple as roughing up the action where it will make contact with the bedding, and gluing it in place. I'm no expert on this but I have succesfully glued them in. I use Devcon for the pillar bedding and jb weld to glue the action in.

 

[Buzzbee]

twilson,
What type of action?

 

[twilson]

Looking at a panda action for glue in.

 

[tightneck]

Don't take this the wrong way but to very effectively glue a rifle just read about bedding one then forget to use the release agent... trust me, it's glued. There are some things you only have to screw up once.

I have inadvertently glued an action in a stock as well. Getting it unglued is not real hard once you know how to go about it.I can assure you that an action that is not properly cleaned up and roughed up, will come unglued at the most inconvenient time,usually mid-match). Many glue-ins have come loose over the years due to improper preparation of the stock or action.