• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

freebore for new 115 DTAC's

Will a .103 freebore place the junction of the boattail above the donut? 6xc with the new 115 DTAC's. This is the freebore on my gunsmiths reamer. I don't want to buy a reamer but will if I need to.
 
This is directly off of David Tubb's Facebook page which he posted Sept. 6th

"115 Rebated Boat Tail reamer dimensions.

Since receiving the new DTAC 115 RBT's I have changed my straight section (freebore) to .140" with a 1 1/2 degree lead.
Neck diameter is still .278

If you stick with a freebore of .160" you just need to make sure you have a 2.850" or greater overall length in your magazine box."
 
I just rethroated a couple of my 6mm barrels and had to extend the throat from .100 to .165. They were throated for 105hyb to the bearing surface just above the neck/shoulder junction. I had to extend the throat every bit of .065 to get the new 115 above the neck/shoulder junction.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,835
Messages
2,223,884
Members
79,899
Latest member
Orville. Johnson
Back
Top