Frankfort decapping tool issue

[Turbulent Turtle]

I use a Frankfort decapping tool to punch out the SRPs from my 308 brass. I have the undersized pins for the Palma brass. I have noticed that the pin gets mangled after a few rounds processed. It looks like the punch us not going straight and seems to push up at the end of travel. I don't like decapping on the press because it sprays the spent primers everywhere.

What other primer decapping tool is there that works with Palma type brass, undersized holes?

 

[Bill Norris]

I use a Frankfort decapping tool to punch out the SRPs from my 308 brass. I have the undersized pins for the Palma brass. I have noticed that the pin gets mangled after a few rounds processed. It looks like the punch us not going straight and seems to push up at the end of travel. I don't like decapping on the press because it sprays the spent primers everywhere.

What other primer decapping tool is there that works with Palma type brass, undersized holes?

Lee Universal de-priming die would work. There is a choice of large or small pins for it.

 

[topclass2017]

I use a Harvey handheld de-primer. Both small and large pins are available.

 

[Fairchaser]

I also use the Frankfort decapping tool with Palma brass with small holes. I had to hone the pin down to fit the small holes. Once I got it to the right size, it has worked flawlessly. I would just work on the pin until it does the job.

 

[Turbulent Turtle]

Lee Universal de-priming die would work. There is a choice of large or small pins for it.

Those are the ones I use. I bought a bunch.
This is Alpha SRP brass. Not Lapua. But adI said, it worked for several years with Lapua and Alpha brass.

 

[C.E.Smith043]

These are hard to beat. I have a 30 cal, 6mm, and .224 I use

 

[Turbulent Turtle]

I use a Harvey handheld de-primer. Both small and large pins are available.

My Harvey deprimer arrived today. Swapped the pins and tried it out. It works like a champ. A little slow, but as I get used to it, it'll speed up. Thanks for the tip.