Frankengun. yours? Let's see em.

[garandman]

Sig Virtus piston upper, standard AR15 lower with conversion block and folding stock (no buffer tube)

 

[jamesh]

6.5 Creedmoor Heavy gun.
Defiance CC single shot RBLP action
My own stock design again.
1.450" barrel
35 lbs with scope

 

[jrm850]

6.5 Creedmoor Heavy gun.
Defiance CC single shot RBLP action
My own stock design again.
1.450" barrel
35 lbs with scope

View attachment 1130020

Cool. The big brother to your other gun? Which one shoots best?

 

[jamesh]

Likely the Creedmoor, wind really blows the little 223 around compared to the 6.5. I havn't had an opportunity to shoot the FTR rifle in competition yet. Matches haven't fit with my schedule. I worked up a load but have shot no groups with it.

 

[CT10ring]

6.5 Creedmoor Heavy gun.
Defiance CC single shot RBLP action
My own stock design again.
1.450" barrel
35 lbs with scope

View attachment 1130020

wow that is solid. bbl must be 14#.

 

[Intheshop]

Here's mine. 1960's R700 ADL action, 22-250 factory takeoff brrl from ads here,223 stock from here,Simmons scope was a freeby with some issues that I fixed. Shooting Lee 225-55 cast at starting jacketed velocity into bragging groups. I'm much more of a sporter brrl,hunter so this gun doesn't make it very far from the truck because of weight. It's been a fun rifle though. Might even get around to painting the stock?.....or not.

 

[Darwin]

My first custom barreled rifle. Rem700, 300 WSM, SAMMI reamer, mag boltface, bushed firing pin, M16 extractor, Benchmark MTU(1.25 for 5, .9 at 27), MDT HS3, Ergo grip, UBR butt with MDT recoil pad, Atlas monopod mount with 1in. scope ring and 4 in. steel shaft for bag rider( not pictured). 4-16x50 Bushnel Elite pictured, replaced with 8-32x40. EGW rail, Burris Sig Z rings. Harris bipod. Metal work and muzzle brake by Go Ballistic Gunsmithing.
1000 yard group.
208 Hornady HPBT
W-W brass
60 gr IMR-4451
Fed 210M
2.840 COAL
2835 fps.

 

[Nature Boy]

not as exotic as some of the builds here, but it is a shooter. put it together myself.

Savage Target Action with a little tweaking of the Accutrigger
Brux 6BR barrel, 1 in 12 twist. barrel smithed by SkeetLee
XLR Industries Element chassis. drop it in, bolt it down, shoot crazy good.
Vortex Golden Eagle glass

all 80 Bergers, jamed 15 thou, with N135

all 5 shots at 100 yds

View attachment 1129560 View attachment 1129561

So THAT’S what they mean when they say “MOA all day”

You obviously did your part too

Really nice shooting

 

[Dud]

That's what a Savage Axis with a hacksaw cut receiver, an ARC Nucleus Barlok barrel nut setup and a 31" barrel looks like.

I still have to face the receiver square to the threads so it's just a mock-up now. Hopefully it will be closer to complete by the end of the week.

Maybe it will be "done" in December or early next year.

I think I am going to make an 18" forend for it and paint it (and other stuff) after I get it sorted out at the range so it's going to be pretty ugly for a while but it will clean up when I get a chance.

 

[jonbearman]

Rem M-7, PTG bolt, SS PacNor - 6SLR , MDT with a delrin fore end I whittled in the mill, folder.
etc..... leftover parts made usefull

You did a sweet job on that rifle. Your fore end is perfect.

 

[jonbearman]

Ok. Here’s mine. Skeetlee had a Winchester 70 action for sale so I asked him to put a barrel on it in 6.5 Creedmoor and send it to me. I had just received a hunk of Bumblebee so I used it to make a stock. The stock design was influenced by jpretle, who had asked me to make him a prone stock. I bought a PT&G bottom metal mag kit and put the gun together. I mounted my favorite Sightron’s 10-50 scope on it and.....
View attachment 1129012

You did a superb job on that stock. Can you make me one out of bumble bee.

 

[Vodoun daVinci]

Savage 10 FCP-SR in 6.5 Creedmoor. MDT's LSS-XLGen2 chassis, XLR's Extreme Buttstock, Area 419 Hellfire Break, Atlas BT10 Bipod, Athlon Argos BTR 10-40X56 scope in Vortex Precision matched rings. Ergo Tactical Deluxe Grip (since replaced with an MDT vertical Grip.)



Pretty much as FrankenGunned as I can make it now.

VooDoo

 

[Dud]

Savage 10 FCP-SR in 6.5 Creedmoor. MDT's LSS-XLGen2 chassis, XLR's Extreme Buttstock, Area 419 Hellfire Break, Atlas BT10 Bipod, Athlon Argos BTR 10-40X56 scope in Vortex Precision matched rings. Ergo Tactical Deluxe Grip (since replaced with an MDT vertical Grip.)

View attachment 1133197

Pretty much as FrankenGunned as I can make it now.

VooDoo

How do you like the MDT vertical grip on that?

I'm waiting for Black Friday to place an order with them. I need magazines (oddball 3.56") and was thinking about their grip.

 

[Vodoun daVinci]

I was pleasantly surprised with the MDT Vertical Grip - like all MDT stuff it's fit and construction is perfect. It *really* seemed to help with trigger control because I can set/adjust the thickness of the grip and the zero angle makes trigger press straight back. I use the thumb shelf on the chassis and slide my thumb down until I get perfect positioning. Trigger feels like glass breaking now.*SnAp!*

Highly recommended and it's cheap enough that it won't break the bank if it doesn't work out as I'm pretty sure this is not a one size fits all kind of thing.

VooDoo

 

[Dud]

Thanks for the review.

 

[Dud]

I just used a ball point pen spring to get my trigger pull down to about 1 pound.

My forend will be made from a piece of 80/20 extrusion.

I don't think it can get more frankengun unless I just start throwing out parts to make my own from raw materials or non-gun parts.

 

[Eric Leonard]

Stiller Tac 30 .Jewell trigger..Brux 8 twist 6.5x47L at 25 inches..AICS 1.5 Chassis with Atlas Spigot mount Bipod..

It's really smooth and shoots great.