Monday shooter40
Gold $$ Contributor
Anyone use CFE223 or AA2520 or Staball to fire form dasher? I am not willing to use what little Varget I have left on fire forming. So I'm using what I have in my cabinet.
Just about any powder you would shoot will be fine. Just my two cents Tommy Mc. Use what you have on hand.Anyone use CFE223 or AA2520 or Staball to fire form dasher? I am not willing to use what little Varget I have left on fire forming. So I'm using what I have in my cabinet.
What was your forming combo? if you dont mind sharing.Had great results with 4064
30 GR OF VV135 and 104 gr EPSDon’t remember the charge but used some hornady 105’s with a hard jam
If you told the dasher shooters at Williamsport that you used R15 for FF, they would all hyperventilate. lol.I have used rl15 to fireform dasher and it worked out fine. I would think anything in dasher burn rate territory would be sufficient
Why is that sirIf you told the dasher shooters at Williamsport that you used R15 for FF, they would all hyperventilate. lol.
So far #15 is shooting great in my 6 BRA.Why is that sir
Why do I see alot of people neck turning before hydro forming dasher?When i dont load for a match then shoot i use the goofiest powder ever made- superformance. Its not worth using for anything else and its usually overlooked so its available
So theres no donut on that short neckWhy do I see alot of people neck turning before hydro forming dasher?
Forgive my ignorance, but if the lower neck is becoming the upper shoulder, where is the donut being introduced?So theres no donut on that short neck
At the new neck junctionForgive my ignorance, but if the lower neck is becoming the upper shoulder, where is the donut being introduced?