Flare at End of the Brass Neck

[kd4avp]

Sounds like sound advice. I might give that a try. I own a cheap USC but I've heard that there are major differences in USC from cheapies and a good one. I've seen some commercial cleaners on FB before. Might keep an eye out for one in the future.

I am a cheap rascal...lol
Comes from my profession. I will always look for the most economical way to do something.
That being said, the Central Machinery Ultra Sonic Cleaner does a good job from HF.
Get the big one with the valve on the side to change the cleaner.
About 10 to 15 minutes with any brass cleaner or some Dawn and Lemmie Shine...works great.
Rinse well and let dry.
Works for me.

 

[Mike F H]

If you zoom in on the brass pic you can easily see the flare. The pic turned out really good to show the flare. Of course this is one of the worst of the bunch.

The bullet is catching on the edge of the case mouth when seating,be very carefull seating,when you feel the bullet start to engagement in the case,stop and rotate about half a turn and finish the seating.I would also polish the case mouth’s with a wad of steel wool after sizing and trimming.