I am building my first rifle in 6mmBR. This rifle will be used primarily for gophers/yotes and paper out to 600 yrds.
Rifle build parts:
1. Remington XR-100 stock and action.
2. Remington bolt with cone bolt face and milled fluting from Pacific Tool and Gauge.
3. Kreiger heavy Palma contour, 28†– 4 groove, 6 flute barrel. Breech diam. @ 1.25†and land diam. @ .236â€
4. “V†port muzzle brake from Straight Shot Gunsmithing.
5. Dan at Accu-Tig to weld handle to bolt – not sure on handle? Either Holland or Remington 40X?
6. Scope – Burris Black Diamond, Bushnell 6500 elite tactical turrets or Night Force?
7. Free Bore - .080†or .104â€. These are the two measurements I found on the website. Planning on shooting 87 gr. V-max and 105 gr. A-max bullets. Whats your recommendation on this?
8. Will be shooting out to 600 yrds – will there be special rings/bases required for elevation?
9. What am I missing/forgetting to complete this build?
10. Was thinking of removing ejector primarily for ease of brass recovery – any thoughts on this? Thanks for your input. Cheers Claude
Rifle build parts:
1. Remington XR-100 stock and action.
2. Remington bolt with cone bolt face and milled fluting from Pacific Tool and Gauge.
3. Kreiger heavy Palma contour, 28†– 4 groove, 6 flute barrel. Breech diam. @ 1.25†and land diam. @ .236â€
4. “V†port muzzle brake from Straight Shot Gunsmithing.
5. Dan at Accu-Tig to weld handle to bolt – not sure on handle? Either Holland or Remington 40X?
6. Scope – Burris Black Diamond, Bushnell 6500 elite tactical turrets or Night Force?
7. Free Bore - .080†or .104â€. These are the two measurements I found on the website. Planning on shooting 87 gr. V-max and 105 gr. A-max bullets. Whats your recommendation on this?
8. Will be shooting out to 600 yrds – will there be special rings/bases required for elevation?
9. What am I missing/forgetting to complete this build?
10. Was thinking of removing ejector primarily for ease of brass recovery – any thoughts on this? Thanks for your input. Cheers Claude