First Drop Port Need Help!!!

[bdale]

Any one have pictures they can post of your drop port opening in your stock, my gunsmith and myself are working on our first drop port and putting the final touches on a new build but are having trouble getting the case to drop out the bottom of the stock gets hung up :-\

 

[Tim Singleton]

I re stocked my own. Some trial and error. Don't glue in to begin with. You may have seen this?

http://www.viperactions.com/files/stockinlet.pdf

 

[bdale]

Thanks Tim I don't think we have removed enough material :

 

[Drop Port]

Any one have pictures they can post of your drop port opening in your stock, my gunsmith and myself are working on our first drop port and putting the final touches on a new build but are having trouble getting the case to drop out the bottom of the stock gets hung up :-\

Without pulling it out of the stock I can only tell you the size of the round hole in the bottom of the stock, not sure if that is what you are looking for. I could tell you the proximity from the front of the bolt in the rear position to the funnel if needed.

I can also tell you its my favorite live varmint set up

 

[Dusty Stevens]

If you follow the blueprint itll work flawlessly

 

[bdale]

Thanks, I down loaded the blue print and will give it to my smith tomorrow, I don't think we removed enough material our hole is in the right location according to the print. Our funnel doesn't look to be quiet large enough at the top. Thanks for the help