Eliseo stock question

[Macropod]

With an Eliseo stock using a scope how tight do you tighten the four brass set screws or do you just leave them in light contact?

I can see that they could potentially change zero with varying tension so maybe very light contact is the ideal set up. The 3 take down screws are easily dealt with but these set screws leave me wondering.

 

[Charliemac]

Email Gary, ask The Man.

 

[morpheus]

Refer to step #6 here: http://www.gotxring.com/wp-content/uploads/2012/03/b1assemblyinstructions.pdf

6) Snug the brass set screws lightly to about 20 in. lb.

 

[Macropod]

Thank you gentlemen. Your help is most appreciated.

 

[FatBoy]

Refer to step #6 here: http://www.gotxring.com/wp-content/uploads/2012/03/b1assemblyinstructions.pdf

6) Snug the brass set screws lightly to about 20 in. lb.

Leave it to an engineer to read the damn directions

 

[potatoe]

Make sure you don't over tightened, you can strip the threads before you know it