Dry Lube case necks??

[FTRinTexas]

I have used ultrasonic cleaners (pretty clean) and the SS pins with a Thumbler Tumbler (very clean). Is getting the inside case neck too clean a problem? Saw a picture of Neconos Dry-Lube Kit in the Daily Bulletin, does the powder stick to the dry lube? If so, wouldn’t it work better to apply the dry-lube to the bullet before seating? Are other methods worth looking into?

 

[JERRYHM]

Have you ever put two glass surfaces together? Hard to separate?
The same thing happens when two polished surfaces are put together under pressure ( called stick-shun ). Same thing happens when loads are not shot for a long time. Couple cures: only shoot newly seated loads, or load long and re-seat before firing. Having more neck clearance reduces the problem..

If you polish the inside of the necks, you better use some sort of lube!

 

[Chuckhunter]

I use a Bonanza Case graphiter with Imperial dry neck lube. It is a graphite based lubricant. Motor Mica will also work. Powder won't stick to either of the two and they will not affect or degrade the powder. A must if you are using an expander ball in your dies.