Dovetail to picantiny adapter recommendation

[mefizto]

Greetings all,

I want to mount a scope on a Walther 11mm dovetail and would prefer to use a picantiny rail. Could someone recommend a quality one with 20-25 moa?

Thank you,

M

 

[Eric Leonard]

if the Walther dovetail is like the Anschutz the DIP rail might work,,they make the same rail for the CZ 11 mm dovetail that might work also,,

I have 4 of the CZ 11mm and one of the CZ 16mm on my CZ 527 V 223 and one of the CZ 527 16 mm on my Brno Model 4 22LR,,

I bet if you contact them they might know if it will work and might send you one and if it doesnt would refund your money,,they are really good to deal with,,

25 MOA taper CZ 11mm to pic rail on my CZ 455

 

[TRG]

These are for the 11mm Anschutz rail. They are actually made with a curvature on the underside which follows the Anschutz action top. Combined with Burris Signature Z-Rings you can get your additional elevation from the inserts. If they will fit your Walther it is an elegant solution. Call J and P. https://www.jnpgunsprings.com/product_info.php?cPath=8&products_id=239

 

[Marksman63]

Try this one:

http://www.parabellumarmi.com/prodotti/Contessa_A_-_Slitta_in_acciaio_per_carabina_CZ452-455_inclinata_20_MOA/MOAS201309200919260000002626.html

 

[Sray53TXTN]

Champions choice has this version:
Sun Optics 9.5mm-13mm Adjustable Base To Picatinny Top Part # SM7015
SUN OPTICS 9.5mm-13mm ADJ BASE TO PICATINNY TOP SM7015
Retail Price $24.00
Quantity
In Stock: 5

I have a NF Competiton mounted on my 1913 Anschutz with this one.
Could use Zee rings with adjustable inserts to get your 20-30 degree requirement.

 

[Fotheringill]

Why not skip the rail and use Burris Signature Rimfire rings?

 

[Marksman63]

I think it's a "tacticool" choice and you can gain 20 MOA for longer range shooting

 

[mefizto]

Gentlemen,

thank you very much for all your recommendations.

To explain, I need a fairly high mount, at least 1.5 inches from the top of the receiver to the bottom of the scope and droop, for longer range shots. I am not aware of any rings that high with MOA, so I thought that the rail would (1) provide the MOA and (2) add some height.

Kindest regards,

M

 

[Taildrag15X]

Gentlemen,

thank you very much for all your recommendations.

To explain, I need a fairly high mount, at least 1.5 inches from the top of the receiver to the bottom of the scope and droop, for longer range shots. I am not aware of any rings that high with MOA, so I thought that the rail would (1) provide the MOA and (2) add some height.

Kindest regards,

M

Check here for just the ring option....http://www.opticsplanet.com/burris-airgun-rimfire-signature-1-rifle-scope-mount-rings.html

 

[mefizto]

Hi Mike,

thank you; the scope that I will use is 30 mm tube, so I will look at Burris' page to see what they have something similar in that diameter.

Kindest regards,

M

 

[Fotheringill]

Burris has 30 mm Signature rings BUT no +/-20 inserts, only the lesser ones.

 

[Marksman63]

This is what I mean

 

[willymakit]

Kelbly 11mm rings, any height you want, shim and bed with Devcon or JB.