Does anyone know about .410 over/unders?

[Mr.Knowit all]

I have .410 over/under that was given to me many years ago and my father just gave it back to me and of course it is broken. The selector switch that makes the firing pin hit the top barrel (.22) or the bottom (.410) is broken. It will not go into either position. Anyone work on these or know of a good/trustworthy smith that could help me out?
Thank you.

 

[Preacher]

Knowing the make of your rifle will help a lot....

 

[hunter243sgk]

I remember when I was a kid a neighbor had a 410 side by side that I wanted so bad. They wouldn't even let me handle it or talk about a price.

 

[JRS]

Is it the M6 Scout or Savage 24?

 

[swd]

Those old Savage's are very basic. The selector if I recall is kind of a pita to change but any local gunsmith can do it. No need to try and find some one who specializes.

 

[butchlambert]

Is it the M6 Scout or Savage 24?

Probably not as he said it was a 410 over and under. M24 was shotgun and rifle combo I think.

 

[TRA]

I have .410 over/under that was given to me many years ago and my father just gave it back to me and of course it is broken. The selector switch that makes the firing pin hit the top barrel (.22) or the bottom (.410) is broken. It will not go into either position. Anyone work on these or know of a good/trustworthy smith that could help me out?
Thank you.

 

[Dans40X]

Savage 24 "C" &/or 24 "D" selectors are on opposite sides of the receiver & are not interchangeable.

 

[butchlambert]

My reading comprehension isn't what it needs to be.

 

[Preacher]

My reading comprehension isn't what bit needs to be.

Mine either, it was not quoted like that to start I don't believe

 

[Mr.Knowit all]

Knowing the make of your rifle will help a lot....

Sorry. I cut that post a little short.
Savage model 24 DL

 

[Barlow]

I have a Stevens 22-410, same as 24 Savage. The side selector wore out years ago. The hammer was replaced with one that has a hinged or movable firing pin selector built into it, and it works well. But, I believe you can get a kit from somebody ( I can't recall who) to replace the original. Do a google search. Good luck, Barlow

 

[Mr.Knowit all]

Thank you guys.

 

[gunsandgunsmithing]

I have a Stevens 22-410, same as 24 Savage. The side selector wore out years ago. The hammer was replaced with one that has a hinged or movable firing pin selector built into it, and it works well. But, I believe you can get a kit from somebody ( I can't recall who) to replace the original. Do a google search. Good luck, Barlow

Try Numrich Gun parts for the kit