DJ's brass service

[BOB LEE SWAGGER]

Yes I feel lazy and yes you pay for it, but damn the brass I received is perfect!

 

[wboggs]

Yes I feel lazy and yes you pay for it, but damn the brass I received is perfect!

Second, quality of work on my brass was excellent. Bill

 

[Bill3508]

Just normal brass prep or case forming?

 

[BOB LEE SWAGGER]

6.5X.284 Necks turned. Not much point to turn if you're not consistent - which my efforts were!

 

[DJSBRS]

6.5X.284 Necks turned. Not much point to turn if you're not consistent - which my efforts were!

Thank you for your respectful remarks guys. It is my desire to exceed my customers expectations regardless if it is neck turning, Hydro forming, case forming or case prep.

Good shooting!

DJ
DJ's Brass Service
205-461-4680

 

[Brians356]

I bought 39 Norma 6mm Rem cases from DJ, ostensibly un-fired, but decades old. Upon casual inspection they all appeared as described (to both DJ and myself) but during subsequent dimensional sorting, I discovered some of them had actually been fired. DJ offered to refund the total purchase price, with me keeping the cases! I countered with a more reasonable win/win settlement. I couldn't be more pleased with DJ's response. Kudos!
-

 

[Charles]

Sent approx. 180 6br cases's to DJ's to be formed to Dasher specs. just received the formed case's today,very happy with them saved me a lot of time and money and wear on my barrel. i have fireformed my own cases before this is much easier. Would recommend DJ's service.

 

[sdeal5]

Can't say enough good things about Darrel's customer service. He once got up at 3:00 AM to turn some brass for me that I needed in a hurry, before he left to go to a shoot. He also has shipped me 2 pieces of brass of mine that had inadvertently fallen out of a box, so that I would have an even amount of that lot #--- all on his on time and at his own expense. I'd say his CS is second to none. Oh yeah, he does a great job too. Kudos to DJ's.

 

[ShootDots]

One of the concepts I have mentioned a few times, I believe merits mentioning again. If you have DJ do ALL your original prep for a Dasher, the cost of doing it yourself is very nearly the same. I had DJ Hydroform 200 pieces of 6mmBR into Dasher. I also had DJ turn my necks down to 12K neck wall thickness, anneal and clean. It cost "about" 200 bucks for the 200 rounds that included shipping. Now if you use 200 Berger 108's, a pound of powder, 200 primers and BARREL WEAR, I think you will find it comes mighty close to the cost of having DJ do it for you and you SAVE whatever barrel wear you would not have by doing it yourself.. Think about that!