DIY Port Level Ammo Block (PLAB)

[Killick]

Here are some pics of my DIY P.L.A.B.. I cannibalized the goose neck from a Craftsman bendy style utility light and bought a 3.5"x1" Acetal disc on ebay. Drilled out the disc to accept 20, .284 Win. rounds and screwed it to the bendy arm. The arm wasn't sturdy enough to support loaded PLAB so I inserted a 1/8" soft steel rod cut to length into the arm before I screwed it to the disc. Wasn't using the windage adjustment cable on the Bald Eagle rest so I used the 5/16"x18 bolt hole it was attached to with the other end of the arm. Total cost - @$8.00

See pics below.\/

 

[Killick]

...pics below. \/

 

[Killick]

Close up.

 

[Richard Jones]

I like using one's head. Well done, sir.