Hi guys,
I recently got a Dasher barrel and am working up a load table. My throat was made with the Berger 95VLD in mind and a 1:8 twist.
I get pressure signs at the 32 grain mark using N150 and CCI 450 primers. Does anyone out here have a 6Dasher as well, if so, are you getting craters/flat primers? I lost three cases to loose primer pockets during the first testrun after fireforming, but this was with 34-36gr loads. As there are no tables I am trying to find the limits myself by slowly building up loads.
Tonight I will try N140,similar burnrate as reloader 15) and CCI 450 and BR4 to see if this makes a difference, as N150 is not getting me above 2950fps with a 105gr Scenar without loosing cases to loose pockets.
Any help from Dasher veterans is appreciated to save some cases finding out on my own
Jim
I recently got a Dasher barrel and am working up a load table. My throat was made with the Berger 95VLD in mind and a 1:8 twist.
I get pressure signs at the 32 grain mark using N150 and CCI 450 primers. Does anyone out here have a 6Dasher as well, if so, are you getting craters/flat primers? I lost three cases to loose primer pockets during the first testrun after fireforming, but this was with 34-36gr loads. As there are no tables I am trying to find the limits myself by slowly building up loads.
Tonight I will try N140,similar burnrate as reloader 15) and CCI 450 and BR4 to see if this makes a difference, as N150 is not getting me above 2950fps with a 105gr Scenar without loosing cases to loose pockets.
Any help from Dasher veterans is appreciated to save some cases finding out on my own

Jim