cz 527 scope rings

[Doug30racer]

i have built a custom rifle based on the cz 527. Now woth the larger barrel and a 44 sized front bell on the scope, i need bigger rings. Any good suggestions?

 

[ED3]

I would get a rail from CZ,( or some other source) which would open up the possibility of using almost any good rings.
Not sure if the CZ rails are 0, or perhaps 20MOA, but they're in their online web store...

 

[watercam]

I used this one:
https://kinneysshootingsupply.com/.../cz-rails/.../dip-dp-19007-cz-527-picatinny-rail-...

Held in place with eight set screws and lower than the CZ unit. Works great.

 

[Eric Leonard]

yeah I have the 20moa taper DIP rail on my 527V 9 twist 223 and in 7 years and 5,000 rounds the Leupold 4.5-14 LR/T has only needed adjusting when I change loads,,

if my smith did metric threads I would have it rebarreled,,it is my 13 year old sons favorite rifle,

 

[Doug30racer]

does that dp 19007 then work with the cz rings?

 

[Eric Leonard]

the DIP rail takes any rings that would fit Weaver bases or a Pic rail,,the CZ rings are 16mm grooves,,the CZ rings wont fit the DIP rail or anything else that I know of except a few of the old Brno rimfire rifles,,

 

[ED3]

the DIP rail takes any rings that would fit Weaver bases or a Pic rail,,the CZ rings are 16mm grooves,,the CZ rings wont fit the DIP rail or anything else that I know of except a few of the old Brno rimfire rifles,,

Yep.
The upside is that having a rail opens up the possibility to every size, quality level, and price point of the scope ring market.