CZ 457 Trigger Upgrade

[Unclered]

I’m thinking of upgrading the trigger in my CZ 457. Has anyone tried the Jard trigger as well as the Timney? Pros and Cons/Comparison between the two.

I am Very satisfied with the Timney. 12-13 oz & breaks like a cold carrot. Be sure to torque the screws to proper recommendations when reinstalling the receiver to the stock. . 20-25 inch pounds.

 

[archerforkids]

I bought a spring from mrh1958 here on accurateshooter and am very pleased with it. $10.99 got me down to 8oz.

 

[kojaone]

I bought a Jard and did not think it was better--lighter yes but mine was mushy way too much travel before break no matter how it was adjusted
I have found that with lighter spring the factory trigger just needs very careful adjustment of the sear--a tiny adjustment at a time until it is happy--It seems like it has a distinctive 'ping" when it is perfect--I can go with less sear engagement but it has a dull sound and is not as consistent per my gauge.
It helped with our MTR's to add a shim from Triggershims.com --Lance is a good guy--ships Fast--taking some side play out of it made sear adjustment more stable
did not take but .002 on one rifle and .003 on another but it truly helped
FWIW the CZ trigger pin with e clips from Ebay seems like a quality unit

Your mushy, LOL