Custom seating die?

[Clearsight]

I'm having a custom reamer made for my rifle and would like to have a seating die made from it. I saw on here a while back a post that mentioned who did it, but I can't find it. And no luck searching it on the web. Something like a LE WILSON chamber type cut with my reamer. Thanks for any info?

 

[WillyTP]

Correct, for arbor type press L.E. Wilson makes blanks based on caliber.

For screw in type, newlon makes a standard and micrometer top.

 

[dave@aDave]

try Mr. Neil Jones at:
http://www.neiljones.com/
I have a set that he made for me.
Sometimes I just take them out and look at them!

 

[Clearsight]

Thanks guys, but I remember that there was someone that did the LE wilson blank specificallly. You send them your reamer and I think it was around 150. and they make it.

 

[WillyTP]

Who ever doing your barrels should be able to do it for you.

 

[KenOath]

So you can have a seater Die cut with your finishing reamer??

 

[avidflyer]

So you can have a seater Die cut with your finishing reamer??

Yes very easy.

 

[KenOath]

Yes very easy.

Thanks will be looking into it, LE Wilson blanks are easy enough to get, hopefully my smith can cut it for me. Cheers

 

[bblackwell]

Check this one out. It produces very low runout.

http://www.xxicsi.com/calibrated-bullet-seater.html

 

[Tim Singleton]

Thanks guys, but I remember that there was someone that did the LE wilson blank specificallly. You send them your reamer and I think it was around 150. and they make it.

I can make you one
You send your reamer and the Lee blank