Belly Benchrester
Silver $$ Contributor
Thinking of putting a LH action in a RH inlet panda stock. Anyone have experience with this? Is it a hastle? Hopi
Converting panda stock from right hand to left
- Thread starter Belly Benchrester
- Start date
Pretty straight forward relive for the bolt and ejector port . Paint and you are done. Tommy Mc
NorCalMikie
Gold $$ Contributor
Looks pretty straight forward. Plug the right hand bolt handle cut and re cut it on the left side.
Did the same on a Savage right hand grey/black laminated BR style stock.
Plugged the right hand bolt cut with bondo, touched it with a black marker and blended it to match, re cut the bolt cut to the left side and shot it with Poly. Can't tell it was ever changed.
Did the same on a Savage right hand grey/black laminated BR style stock.
Plugged the right hand bolt cut with bondo, touched it with a black marker and blended it to match, re cut the bolt cut to the left side and shot it with Poly. Can't tell it was ever changed.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.