• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Collet dies in 6mm BR

Milanuk--

Had the same problem with RCBS 6BR dies--the decapper tip is too large.

This is covered in the FAQ, but it is worth repeating. When Lapua started making 6mm BR Norma brass ten years ago, Lapua adopted a 1.50mm,0.059") flash hole size. However, Lapua tells us that production tolerances run up to 1.60mm,.063"). A standard decapping rod is 1/16",.0625") decapping rod. Redding and Harrell's ships dies with .057" diameter decapping rods--except when they make a mistake.

You choice is to ream to 1/16" or get the right size pin. We prefer the latter. If Lee doesn't make one, you'll need to turn the pin down or decap with a different die.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,848
Messages
2,204,857
Members
79,174
Latest member
kit10n
Back
Top